IDEAL CONTRACTOR SMALL JOB SUPPLY KIT (QTY: 1)

The IDEAL CONTRACTOR SMALL JOB SUPPLY KIT is close to being the same as the Complete Job Supply kit, but with a few items left out that you may already have.  This supply kit contains just the essentials for a typical small job with a 3-coat epoxy floor system, as most Contractors typically already have or re-use their 18" roller cages and 9" frames. 

So, we left those out of this kit to keep it simple and provide your crew with all of the standard items that are one time use.  Keep more of these kits in stock for the larger jobs you are doing with a larger crew.

A suggestion for buying these kits, is to get them in bulk or pallet and get one Contractor ReStock Kit for every 4 or 5 Small Job Supply Kits.  That way you will replenish your roller cages as they wear out for an average 4 for 5 jobs.

Having these kits in stock ready to go, means no wasted time at the beginning of the workday, and no forgotten supplies.  You or your crew, can just grab a box and head straight to the jobsite.  Pop it open, set up the mix area and be ready to install.

TIME IS MONEY, and we know that simply saving 15 minutes of each workday adds up to thousands of Dollars saved each year.  Thats a fact.  The savings will immediately add up because "It's all in the box."  You'll notice an increase in productivity with the added help of maintaining your quality and image in having professional, organized installers, which helps showcase your company.

Contents of the box:

Tarp (1)- Set up your mix area by first placing the tarp on the ground providing plenty of room to set up your materials and supplies and help keep your jobsite clean and better organized.

Blue Tape (1)- Mask over objects, bottoms of walls, doorways, etc, to help keep the job neat and clean, and keep the epoxy materials from getting on them.

5 Gallon pails (3)- A clean 5 gallon pail for each coat of epoxy or urethane liquid for the floor being coated.

2 1/2 Quart cups (6)- Use the 2 1/2 quart metering pails to measure your A & B for each mix, and to measure small quantities as needed. 

1 Quart cups (3)- Use the 1 quart metering cups for small quantities, or to cut in the edges of the room.

2" Chip Brushes (6)- To cut in the edges and inside corners of the perimeter of the room of the floor being coated, as well as any fixed objects such as a post, steps, cabinets, etc.

9" Roller Covers (3)- For each layer of epoxy, a 9" roller is used to smooth out the epoxy liquids along the edges and corners of the floor being coated.

18" Roller Covers (3)- For each layer of epoxy, an 18" roller is used to smooth out the epoxy liquids across the large open space, or field, of the floor being coated.

Small tip:  When done with your rollers, immediately place them inside a plastic trash bag before walking off of the floor.  Have a helper grab the bag to carry it to your tarped area.  This avoids drips from being tracked across areas that you want to be kept clean. The helper can then grab the outside of the trashbag and pull the roller covers off of the roller frame or roller cage by gripping them through the outside of the bag and not have resin dripping all over the tarp or all over their hands. The used roller covers are now in the trash where they belong.

Order these supply kits by the pallet and save more money by buying in bulk.  Grabbing a to go box per job really makes it easy to start the day and not have to worry at all that you don't have everything you need when you get to the jobsite!

If there are additional items we have that your company uses and you would like to customize your Job Supply Kit, send us a contact message and let us know and we will help accommodate.  We  also offer the ability to place your company brand on the buckets and boxes for an even more professional appearance when your customers and others see you on the job. 

Find our contact form at the bottom of our home page and ask for more information! 

We're here to help you make more money.